The new guidelines stem from the 2017 results of the Systolic Blood Pressure Intervention Trial (SPRINT), which studied more than 9,000 adults ages 50 and older who had systolic blood pressure (the top number in a reading) of 130 mm Hg or higher and at least one risk factor for cardiovascular disease. The study's aim was to find out whether treating blood pressure to lower the systolic number to 120 mm Hg or less was superior to the standard target of 140 mm Hg or less. The results found that targeting a systolic pressure of no more than 120 mm Hg reduced the chance of heart attacks, heart failure, or stroke over a three-year period.
Healthcare professionals use a stethoscope and a manual sphygmomanometer to measure your blood pressure. Typically they take the reading above your elbow. The sphygmomanometer has a bladder, cuff, bulb, and a gauge. When the bulb is pumped it inflates the bladder inside the cuff, which is wrapped around your arm. This inflation will stop the blood flow in your arteries. The stethoscope is used to listen for sound of the heartbeat, and no sound indicates that there is no flow. As the pressure is released from the bladder, you will hear the sound of the blood flowing again. That point becomes systolic reading. The diastolic reading is when you hear no sound again, which means that the blood flow is back to normal.
High blood pressure, also known as hypertension (See blood pressure chart below) is called the “silent killer” for a reason — there are no obvious symptoms but it can result in heart attack, stroke and even death. The good news is there’s a lot you can do to maintain healthy blood pressure or get back to one, often without the need for medications.
A nurse takes your blood pressure at your annual physical. The numbers are recorded and the checkup continues. But do you know where on the blood pressure chart your levels are? Are they healthy? Too low? Too high, meaning you have hypertension? If you have high blood pressure or are heading in that direction, you should know that hypertension is among the primary enlarged heart causes, and a major risk factor for heart failure.

Peter, I’ve been using a blood pressure meter for nearly 30 years, so my response is based on my personal experience and information I’ve acquired over the years. First, I suggest that you take your meter to the doctor and have them check several readings of your meter against theirs. For example, If your meter consistently shows it’s 10 points lower than the doctor’s, just delete the 10 points from your meter reading (have them check both numbers so you can adjust both as necessary). Also, it’s common that many doctor’s offices take your blood pressure incorrectly (you should actually sit still for 5 minutes, with your feet on the floor and the cuff at the same level as your heart) . Some of us have”white coat” hypertension, so you may always be elevated at the doctor’s office. If you are a large man, you (and your doctor’s office) may need to use a larger cuff as the wrong size of cuff can affect your reading. Also, I spoke with customer service at one of the companies that makes many of the home & professional meters, and she told me that the automated machines are not very accurate if you have kidney disease or heart failure (I have both). Ask the doctor’s staff to always use the manual system and it will be more accurate than those noisy automatic ones.
Blood pressure readings fall into four general categories, ranging from normal to stage 2 high blood pressure (hypertension). The level of your blood pressure determines what kind of treatment you may need. To get an accurate blood pressure measurement, your doctor should evaluate your readings based on the average of two or more blood pressure readings at three or more office visits. 
×